Daily Maintenance Of Digital Signage

1. Keep the humidity of the environment in which the digital signage is used, and do not let anything with the nature of moisture enter your digital signage. Applying power to digital signage that contains moisture can cause the digital signage components to corrode and cause permanent damage.

2. To avoid possible problems, we can choose passive protection and active protection, try to keep items that may cause damage to the digital signage away from the screen, and wipe the screen as gently as possible to avoid the possibility of injury. reduced to a minimum.

3. Digital signage has the closest relationship with our users, and it is also very necessary to do a good job of cleaning and maintenance. If you are exposed to wind, sun, dust, etc. in the outdoor environment for a long time, after a period of time, there must be dust on the screen, which needs to be cleaned in time to prevent the dust from wrapping the surface for a long time and affecting the viewing effect.

4. It is required that the power supply is stable and the grounding protection is good. Do not use it in harsh natural conditions, especially strong lightning weather.

5. Metal objects that are easy to conduct electricity such as water and iron powder are strictly prohibited in the screen. Digital signage should be placed in a low-dust environment as much as possible. A lot of dust will affect the display effect, and too much dust will cause damage to the circuit. If water enters for various reasons, please turn off the power immediately and contact the maintenance personnel until the display panel in the screen is dry before use.

6. Switching sequence of digital signage:

A: First turn on the control computer to make it run normally, and then turn on the digital signage large screen.

B: Turn off the digital signage screen first, then turn off the computer.

7. When playing, do not stay in full white, full red, full green, full blue, etc. for a long time, so as not to cause excessive current, excessive heating of the power cord, damage to the LED lights, and affect the service life of the display. Do not disassemble or splicing the screen at will.

8. It is recommended that the digital signage rests for more than 2 hours a day, and the digital signage is used at least once a week during the rainy season. Generally, the screen is turned on at least once a month, and it is lit for more than 2 hours.

9. The surface of the digital signage can be wiped with a dry cloth, or dusted with a brush or a vacuum cleaner, and cannot be wiped directly with a damp cloth.

10. The digital signage needs to be regularly checked for normal operation and whether the line is damaged. If it does not work, it should be replaced in time. If the line is damaged, it should be repaired or replaced in time. Non-professionals are prohibited from touching the internal circuit of the digital signage to avoid electric shock or damage to the circuit; if there is a problem, please ask a professional to repair it.